Categories:    Magpul MOE Hand Guard, Light/Laser Mounts & Accessories, Vertical Grips & Rails

Magpul MOE Handguard Illumination Kit

The MOE Illumination kit includes everything needed to mount a 1913 Picatinny rail compatible weapon light to a MOE Handgaurd.  The four piece kit includes a short rail section, cantilever rail mount, standard pressure switch pad mount, surefire ST pressure swith pad mount, and all required mounting hardware.

Features

• Compatible with all lengths of MOE Hand Guards and Bushmaster® ACR™
• Durable polymer construction
• Optimized for Surefire® switch pads, both old and new ST styles
• Cantilever mount positions light further forward providing more room with shorter Hand Guards
• Made in the USA

NOTE: Kit is specifically designed for MOE and ACR Hand Guards and is NOT compatible with other makes.

Category:    Light/Laser Mounts & Accessories

Surefire Rail Mount

SureFire Helmet Lights are an excellent product, but are often limited to helmets. The SFRM Rail Mount allows cost-effective use of the light on weapon systems that use MIL-STD 1913 accessory rails. Takes the advantages of all the Helmet Light LED combinations SureFire has to offer, and places them on your weapon in seconds.

Machined from lightweight 6061 T6 aircraft grade aluminum, then Type III hard coat anodized. Fasteners are black oxide coated stainless steel. Shoe interface is high impact modified glass filled Nylon 6.

Compatible with SureFire Helmet Light models HL-1A through D-TN

The SFRM-001 comes with detailed instructions and installation tool. Proudly made in the USA.

Category:    Light/Laser Mounts & Accessories

One Inch Flashlight Mount

Includes plastic sleeve bushing to accept a flashlight with a 7/8 inch diameter.

Category:    Light/Laser Mounts & Accessories

GGG-1389 - G2 Flashlight Mount

Category:    Light/Laser Mounts & Accessories

Daniel Defense 6001 Offset Light Mount - Standard Model

The Daniel Defense Offset Light Mount is designed so that as the shooters forward hand grips the vertical foregrip, his thumb has quick and perfect access to the rear button of his flashlight. The standard model utilizes a hex head bolt for secure attachment.

Category:    Light/Laser Mounts & Accessories

VLTOR SM-OCG Offset Flashlight Mount

The SM-OCG (Off-set Scout Mount) Fits both the G-series and CK-series (Classic Knurled) SureFire Flashlights.

Category:    Light/Laser Mounts & Accessories

YHM-9486A Dovetail Angle Mount

Category:    Light/Laser Mounts & Accessories

YHM-9690A 3 Slot Dovetail Angle Mount

Category:    Light/Laser Mounts & Accessories

Vltor Light Mount For Surefire CK Series

Category:    Light/Laser Mounts & Accessories

Vltor Light Mount For Surefire E Series

Category:    Light/Laser Mounts & Accessories

Vltor Light Mount For Surefire G Series

Category:    Light/Laser Mounts & Accessories

Figure 8 Flashlight Mount for .750 barrels

Securely holds 1 Inch diameter flashlight to a .750 diameter barrel.

Category:    Light/Laser Mounts & Accessories

Tacstar UBM-1 Barrel Clamp

Universal Barrel Mounts Attaches WLS 2000 light or similar to barrel. Mounts clamp on securely and easily.

Two-piece precision machined mounts fit firearms barrels from 1/2" to 3/4" barrel to 3/4" diameter light.

 

 

Category:    Light/Laser Mounts & Accessories

Tacstar UBM-2 Barrel Clamp

Universal Barrel Mounts Attaches WLS 2000 light or similar to barrel. Mounts clamp on securely and easily.

Two-piece precision machined mounts fit firearms barrels from 1/2" to 3/4" barrel to 1 inch diameter light.

Category:    Light/Laser Mounts & Accessories

Tacstar UBM-3 Barrel Clamp

Universal Barrel Mounts Attaches WLS 2000 light or similar to barrel. Mounts clamp on securely and easily.

Two-piece precision machined mounts fit firearms barrels from 3/4" to 1" barrel to 3/4" inch diameter light.

Categories:    Light/Laser Mounts & Accessories, GG&G Tactical Products

GG&G 1317 - Mossberg 590/500 Forearm With Flashlight Mount

The GG&G 500 and 590 Flashlight Mount kit includes a unique mounting bracket that securely attaches to the factory forend tube using the factory forearm retaining nut. The kit also includes a new factory Mossberg Police synthetic forearm precision cut to clear the 500 and 590 flashlight mounting bracket, a MIL-STD-1913 rail and an assembly tool. To install, simply remove the factory forearm from the slide assembly and install the new forearm, mounting bracket and MIL-STD-1913 rail.

 

Categories:    GG&G Tactical Products, Light/Laser Mounts & Accessories

GG&G 1390 - Remington 870 Forearm With Flashlight Mount

The GG&G 870 Forend Flashlight Mount uses the factory forearm retaining nut and provides a rock solid, but tactically sound mounting system. A flashlight mounting ring can be used with a flashlight, or you can opt to use a flashlight with an integral mount. The rail is located at the three o' clock position giving strong right-handed shooters the tactical advantage at night. The Remington 870 flashlight mounting bracket is precision machined from rugged 4140 chrome moly steel and  is manganese phosphated matte black per mil-spec. The 870 Forearm Flashlight Mount has been designed for rigors and professional use.

Important TIP :  We suggest using an LED flashlight bulb to reduce the possibility of bulb failure.

Categories:    New Products, Magpul MOE Hand Guard, Light/Laser Mounts & Accessories

Magpul MOE Scout Mount - LEFT

Designed for use with MOE Hand Guards, the Scout Mount allows the attachment of Surefire Scout Light Weaponlights and many 1913 Picatinny mounted lights. Made from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, the Scout Mount also features a streamlined, low-profile design to reduce snagging. All hardware necessary for attachment to MOE Hand Guards as well as directly affixing a Scout Light is included.

Left side model to position the light high at 11 o'clock.

Categories:    Magpul MOE Hand Guard, New Products, Light/Laser Mounts & Accessories

Magpul MOE Scout Mount - RIGHT

Designed for use with MOE Hand Guards, the Scout Mount allows the attachment of Surefire Scout Light Weaponlights and many 1913 Picatinny mounted lights. Made from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, the Scout Mount also features a streamlined, low-profile design to reduce snagging. All hardware necessary for attachment to MOE Hand Guards as well as directly affixing a Scout Light is included.

Right side model to position the light high at 1 o'clock.

Category:    Light/Laser Mounts & Accessories

StreamLight 870 Mount

StreamLight flashlight mount for Remington 870 12 gauge can be adapted to 1100 and 11-87 12 gauge models

Category:    Light/Laser Mounts & Accessories

Tango Down Surefire Ball Cap Mount

The SFHL mount allows the use of your surefire light on ball caps, vehicle sun visors, etc... without purchasing expensive additional lighting.  Just transfer light from helmet to ball ball cap wherever hands -free illumination is desired.  Comes with detailed instructions.  Compatible with SureFire Helmet Light models HL-1A through D-TN.  DARK EARTH

Category:    Light/Laser Mounts & Accessories

TDI 2" Rotating picatinny rail belt clip

Keep your hand free by attaching your flashlight mount and light or any small Picatinny Rail Device to this ingenuous device.
360° rotation keeping the light in the direction required and making it ideal for Law Enforcement Officers, Paramedics, Hikers etc...

Category:    Light/Laser Mounts & Accessories

TDI - Rotating picatinny rail belt clip Heavy Duty for 2.25" Belts

Keep your hand free by attaching your flashlight mount and light or any small Picatinny Rail Device to this ingenuous device.
360° rotation keeping the light in the direction required and making it ideal for Law Enforcement Officers, Paramedics, Hikers etc...

Category:    Light/Laser Mounts & Accessories

M3 Pocket Remote

Backplate switch with short cord for pistols and foward grips.